Product Description
The Allen-Bradley 1732E-12X4M12QCDR Digital I/O Dual-Port Ethernet Module, designed for indoor use only with an IP65/66/67/69K and Type 4X enclosure, features 12 inputs and 4 outputs. Input specifications include a maximum off-state voltage of 5V, maximum on-state voltage of 30V (24V nominal, 12V minimum), maximum off-state current of 1.5mA at 5V, and maximum on-state current of 5mA at 30V, with configurable input delay times of 0, 1, 2, 4, 8, or 16ms. Output specifications include a maximum on-state voltage drop of 0.5V and a minimum off-peak blocking voltage of 30V. General specifications include an auxiliary power voltage range of 12-30V, a maximum Ethernet system power current of 1A, a maximum output module current of 2A, a maximum sensor source current of 50mA per input (100mA per connector), and an isolation voltage of 50V (continuous, basic insulation). It operates between -4 and 140F, stores between -40 and 185F, and tolerates 5-95% non-condensing relative humidity. The module weighs approximately 0.43 kg (0.95 lbs) and measures 200 x 60.4 x 45 mm (7.87 x 2.38 x 1.77 inches).
Is Your Device Showing These Signs?
The Allen Bradley 1732E-12X4M12QCDR commonly experiences issues such as communication failures due to corrupted EtherNet/IP configurations or faulty network cabling. Field wiring errors, specifically incorrect sensor or actuator connections, cause diagnostic faults and prevent proper module operation. Internal component degradation, including capacitor failure or IC malfunction, results in intermittent performance or complete module failure, necessitating replacement. Firmware corruption during upgrades or power fluctuations leads to operational instability, requiring reflashing the firmware. Finally, connector pin damage or corrosion impairs signal integrity, causing sporadic I/O errors and necessitating connector repair or module replacement.
Technical specifications
The Allen-Bradley 1732E-12X4M12QCDR is a dual-port Ethernet digital I/O module with 12 inputs and 4 outputs, designed for indoor use. It has an IP65/66/67/69K and Type 4X enclosure. The module has specific voltage and current ratings for both inputs and outputs, configurable input delay times, and operates within defined temperature and humidity ranges. It also has specified power requirements, current limits, isolation voltage, and physical dimensions.
Our Repair Process for the
1732E-12X4M12QCDR
Our repair process for the Allen Bradley 1732E-12X4M12QCDR begins with a comprehensive diagnostic evaluation to pinpoint the root cause of the failure, whether it stems from communication failures due to corrupted EtherNet/IP configurations or faulty network cabling, field wiring errors causing diagnostic faults, internal component degradation leading to intermittent performance, firmware corruption resulting in operational instability, or connector pin damage impairing signal integrity; following diagnosis, we proceed with the necessary repairs, which include correcting EtherNet/IP configurations, replacing network cables, rectifying field wiring, replacing degraded internal components such as capacitors or ICs, reflashing firmware to resolve corruption issues, and repairing or replacing damaged connectors; each repaired module undergoes rigorous testing to ensure it meets or exceeds original performance specifications before it is returned.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY