Product Description
The Allen-Bradley 1771-OD is a discrete output module with six isolated channels, each providing 92-138VAC output at 47-63 Hz and rated for 2 Amperes (6 Amperes total module). It installs in any 1771 I/O chassis using a 1771-WD field wiring arm. It's protected by 5A, 250VAC Bussman MTH5 (or equivalent) fuses accessible behind the front cover; always remove backplane power before fuse replacement to prevent damage from static discharge or arcing. The module features twelve status LEDs indicating output channel energization and fuse status. Wiring connections should use 14-22 AWG stranded or solid copper wire (75C insulation, 3/64" max thickness) with a terminal block torque of 7-9 lbs-in. Operation is safe up to 2000 meters altitude. Always de-energize the system before connecting/disconnecting cables or inserting/removing the module to avoid hazardous electrical arcs and potential explosions. The open-type module dissipates 1.2-13.2 Watts (4.1-45.2 BTU/hr), draws 225mA maximum backplane current, has a maximum on-state voltage drop of 2V at rated current, and a maximum off-state leakage current of 5mA per output.
Is Your Device Showing These Signs?
The Allen Bradley 1771-OD output module commonly experiences failures due to blown output fuses, resulting in deactivated outputs and process downtime. Technicians address this by inspecting and replacing faulty fuses, verifying proper voltage levels, and confirming correct wiring terminations to eliminate short circuits. Corrosion on the backplane connector pins is another frequent problem, causing intermittent communication errors and module malfunction; cleaning or replacing the connector resolves this. Overheating due to inadequate ventilation in the PLC rack also leads to component degradation and output failure, necessitating improved cooling solutions. Finally, software configuration errors, such as incorrect output assignments or logic programming, prevent proper module operation, requiring a thorough review and correction of the PLC program.
Technical specifications
The Allen-Bradley 1771-OD is a six-channel discrete output module for 1771 I/O chassis. Each channel outputs 92-138VAC at 47-63 Hz, rated for 2A. It uses a 1771-WD wiring arm and is protected by 5A fuses accessible behind the front cover (power must be removed before replacement). It features status LEDs, specific wiring requirements (14-22 AWG copper wire, 7-9 lbs-in torque), and is safe up to 2000m altitude. System de-energization is crucial before any connection/disconnection. The module has specific power dissipation, backplane current draw, voltage drop, and leakage current characteristics.
Our Repair Process for the
1771-OD
Our repair process for the Allen Bradley 1771-OD output module begins with a thorough inspection of all output fuses; any blown fuses are immediately replaced, and voltage levels are verified to ensure proper operation. Technicians then meticulously examine wiring terminations, correcting any identified short circuits. The backplane connector is inspected for corrosion; cleaning or replacement occurs to ensure optimal communication. Overheating issues are addressed by implementing improved cooling solutions within the PLC rack. Finally, the PLC program is reviewed and corrected to eliminate any software configuration errors affecting output assignments or logic programming, guaranteeing proper module functionality.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY