ISO-certified repairs with a 2-year warranty — technician-verified quotes within 24 hours, nationwide.
Product Description
The 2098-DSD-075-DN servo drive, manufactured by Allen-Bradley, is an Ultra 3000 digital servo drive equipped with DeviceNet. DeviceNet is an open-source global standard communication network designed for interfacing programmable controllers with smart devices like motor starters, sensors, and operator interfaces using a single cable. This servo drive employs the Unconnected Message Manager to establish a Group 3 explicit message connection and allows for user-configurable fault responses, enabling customized drive behavior in response to various communication errors. The 2098-DSD-075-DN servo drive operates with a 100 to 240 Volts AC input voltage at a frequency between 47 and 63 Hertz, and under normal operating conditions, it can generate a continuous power output of 3.75 kilowatts.
The 2098-DSD-075-DN digital servo drive has a main AC input current of 30 Amps and an output current of 35 Amps. The drive has shunt-on and shunt-off voltages of 420 Volts DC and 402 Volts DC, respectively. It consumes 381 Joules of energy when supplied with 115 Volts AC input voltage and 211 Joules when supplied with 230 Volts AC voltage. The 2098-DSD-075-DN servo drive includes 8 optically isolated, highly-active digital inputs and is manufactured with one normally-open relay, rated for a maximum of 30 Volts DC and 1 Amp. The drive also has an analog output of +/- 10 Volts, using 8 bits and 2 milliamps of current.
When not in use, the 2098-DSD-075-DN servo drive should be stored within an ambient temperature range of -40 to +70 degrees Celsius. The installation area should be relatively humid, with 5 to 95% relative humidity (non-condensing). It is important to ensure that airflow between the drive and the nearest ventilation source is unobstructed. The drive uses 3-phase AC line voltage for power, and it should not be exposed to a corrosive atmosphere.
Is Your Device Showing These Signs?
The Allen Bradley 2098-DSD-075-DN servo drive commonly experiences issues such as communication failures on the DeviceNet network due to cabling problems or incorrect node addressing. Resolve this by verifying the network configuration, checking the physical layer integrity, and ensuring proper termination. Overcurrent faults are frequently observed, often stemming from motor winding shorts, excessive load, or incorrect drive parameters; inspect the motor insulation, reduce the mechanical load, and adjust current limits within the drive configuration software. Position errors and instability arise from encoder feedback problems, requiring encoder cable inspection, resolution adjustments, and verification of the encoder's alignment. Firmware corruption is also a potential issue, necessitating a firmware update or re-flash using Rockwell Automation's software tools.
Technical specifications
Part Number: 2098-DSD-075-DN
Product Type: Digital Servo Drive
AC Input Voltage: 100-240V AC
AC Input Frequency: 47-63 Hz
Main AC Input Current: 30 A
Continuous Output Current: 35 A
Continuous Power Output: 3.75 kW
Bus Overvoltage: 452V DC
Shunt On: 420V DC
Interface: DeviceNet
Our Repair Process for the
2098-DSD-075-DN
Our repair process for the Allen Bradley 2098-DSD-075-DN servo drive begins with a thorough verification of the DeviceNet network configuration, a complete check of the physical layer integrity, and confirmation of proper termination to address communication failures. Overcurrent faults are resolved by inspecting the motor insulation for shorts, reducing the mechanical load to acceptable levels, and adjusting current limits within the drive configuration software. Position errors and instability are corrected through a detailed inspection of the encoder cable, adjustments to the resolution settings, and verification of the encoder's alignment. In cases of firmware corruption, a mandatory firmware update or re-flash is performed using Rockwell Automation's designated software tools.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY