Product Description
The Allen-Bradley 2098-DSD-HV100-SE is an Ultra 3000 Servo Drive module equipped with a Serial Real-Time Communication Systems (SERCOS) interface, utilizing a dual SERCOS port with Fiber optic cable connections. This interface allows the drive to communicate directly with Programmable Automation Controllers (PACs) that have a SERCOS module installed. Additionally, this servo motor can be coupled with MP-Series, 1326AB, F-, H-, N-, and Y-Series servo motors.
Beyond the SERCOS interface, this drive supports the premiere integration option for advanced integration capabilities. This option enables servo drive parameters to be integrated as instructions, becoming embedded within the user program and included in the controller's scan cycle. This method facilitates dynamic changes to drive parameters based on predefined conditions and values set in the program, reducing the need for manual operator intervention to adjust drive settings.
The 2098-DSD-HV100-SE's output characteristics include an output current of 23 A and a continuous output power of 2.5 kW at 230VAC input and 5.0 kW at 460VAC input.
This drive features front panel terminals labeled TB1, TB2, and CN1. TB1 is an 11-point terminal strip for motor connection, incoming power supply, auxiliary power connection, DC output terminals, and an earthing terminal. TB2 is designated for external passive shunt connections, while CN1 is assigned for Normally Open (N.O.) relay output.
This module uses two SERCOS fiber-optic cables. The 2098-DSD-HV100-SE has an input voltage (AC) rating of 230-480V AC root mean square (three-phase) and an input frequency (AC) range of 47-63 Hertz. The nominal input current (AC) is 14A root mean square. It also provides a 23A (0 to peak) continuous output current and a 46 A (0 to peak) intermittent output current. The module's dimensions are 9.54 x 14.2 x 5.97 in (242.2 x 360.7 x 151.6 mm), and it weighs approximately 10.44 kg (22.96 lbs).
The 2098-DSD-HV100-SE is designed for use in industrial environments with a pollution rating no higher than Pollution Degree 2 (as defined in EN / IEC 60664-1) when applied in a Zone 2 environment. This module includes an Autobaud feature, which allows the drive to automatically determine the network data rate, and it also supports Automatic Device Replacement (ADR). The module incorporates a set of parameters used to configure and monitor drives, and configuration is achieved by changing the values associated with these individual parameters.
A precaution is given: ensure that no power is applied to the SERCOS fiber-optic drive and verify that the cables are correctly plugged into the Tx and Rx connectors.
Is Your Device Showing These Signs?
The Allen Bradley 2098-DSD-HV100-SE servo drive commonly experiences issues such as resolver feedback failures, necessitating resolver replacement or cable repair. Overcurrent faults are frequent, often stemming from motor winding shorts or excessive load, requiring motor evaluation and load reduction. Communication errors on the EtherNet/IP network arise due to incorrect IP address configuration or damaged network cables; verify network settings and cable integrity. Drive overheating is a recurring problem, ensure proper heatsink mounting, adequate ventilation, and functional cooling fans. Power supply failures manifest as a complete loss of power or erratic operation; replace the power supply components.
Technical specifications
Manufacturer: Rockwell Automation
Shunt On: 402 Volts dc
Bus Overvoltage: 452 Volts dc
Bus Capacitance: 2820 μF
Input Voltage (AC): 230-480 Voltage rms, 3-Phase
Input Frequency (AC): 47-63 Hz
Output Current (Continuous): 46 Amps (0-peak)
Output Current (Intermittent): 23 Amps (0-peak)
Part Number/Catalog No.: 2098-DSD-HV100-SE
Brand: Allen-Bradley
N/A: Supported
230V ac (rms) Nom: 0.55 A
360V ac (rms) Nom: 0.35 A
480V ac (rms) Nom: 0.25 A
230V ac (0-pk) Max inrush: 47 A
Nominal, 115V ac input,: 1.0 Amps rms
Nominal, 230V ac input,: 0.5 Amps rms
Shunt Off: 420 Volts dc
Series: Ultra 3000 Drives
Auxiliary Power Supply: Yes
Nominal Input Current (AC): 14 Amps Root Means Square
Dimensions: 750 Volts dc
Features: Sercos
Internal Shunt Resistance: 40 Ohms
Our Repair Process for the
2098-DSD-HV100-SE
Our repair process for the Allen Bradley 2098-DSD-HV100-SE servo drive begins with a comprehensive diagnostic evaluation to pinpoint the failure. Resolver feedback failures mandate immediate resolver replacement or cable repair. Overcurrent faults require a thorough motor evaluation to identify winding shorts or excessive load, followed by necessary motor repair or load reduction. Communication errors on the EtherNet/IP network are resolved by verifying IP address configuration and confirming network cable integrity. Overheating issues demand immediate attention to heatsink mounting, ventilation adequacy, and cooling fan functionality. Power supply failures necessitate the replacement of faulty power supply components.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY