Product Description
The Allen-Bradley 100-D115EN11 is an IEC industrial contactor (Bulletin 100-D series) featuring an electronic coil with a 380-500 VAC control voltage. It has 3 main poles, 1 normally closed (NC) and 1 normally open (NO) auxiliary contact, and is designed for panel mounting only. For maintenance, use only genuine Allen-Bradley replacement parts like the magnet coil, main contacts, and auxiliary switch block. After a short circuit, inspect the main contacts and arc chute for welding, which can sometimes be separated with a screwdriver, being careful not to bend the contacts. Available accessories include terminal lugs, shields, covers, and surge suppressors. This contactor is UL, CSA, and CE certified, with a 600V isolation voltage (UL/CSA), Class B coil insulation (VDE 0660), and operates at full rated current between -25 and 60C (derating required above this). The auxiliary contacts are IP20 rated, while the contactor itself is IP00 rated. It also has 3 power poles.
Is Your Device Showing These Signs?
The Allen Bradley 100-D115EN11 commonly presents issues such as coil failures due to overvoltage or thermal overload, resulting in contactor malfunction. Auxiliary contact blocks experience wear, leading to signal errors in control circuits. Inspect the main power contacts for pitting or welding, which degrades performance and creates operational failures. Replace damaged components and verify proper voltage levels to the coil, ensure adequate ventilation to prevent overheating, and confirm correct wiring of auxiliary contacts to resolve these issues.
Technical specifications
The Allen-Bradley 100-D115EN11 is an IEC industrial contactor with a 380-500 VAC electronic coil, designed for panel mounting. It has 3 main poles, 1 NC and 1 NO auxiliary contact. Maintenance requires genuine Allen-Bradley parts, and post-short circuit inspection is crucial, especially for contact welding. A range of accessories are available. The contactor is UL, CSA, and CE certified, with specific voltage and insulation ratings, and operates within a defined temperature range. It also has specific IP ratings for its auxiliary contacts and the contactor itself.
Our Repair Process for the
100-D115EN11
Our repair process for the Allen Bradley 100-D115EN11 begins with a thorough inspection to identify coil failures, auxiliary contact wear, and main power contact degradation. Damaged components are replaced immediately. Voltage levels to the coil are verified to meet specifications, and ventilation is assessed to prevent future thermal overloads. Auxiliary contact wiring is confirmed for accuracy to eliminate signal errors. The repaired unit undergoes rigorous testing to ensure operational integrity and adherence to performance standards before being returned to service.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY