Product Description
The Allen-Bradley 1783-US6T2H Stratix 2000 is an unmanaged, single-port Ethernet switch featuring 6 fast Ethernet RJ45 ports and 2 fast Ethernet single-mode fiber SFP ports. It uses packet-based broadcast storm thresholds of 20 packets per second (pps) for 10 Mbps ports and 200 pps for 100 Mbps ports. Status indicators display network activity, power, and port speed with a 105 ms blink rate. For DC power, use 18-14 AWG twisted-pair copper wire rated for 180F above ambient; for ground, use 14 AWG copper wire with a ring terminal, also rated for 180F above ambient. The switch is din-rail mountable with an open enclosure and operates on 24V (18-60V DC, 18-30V AC, 50-60 Hz), Class 2/SELV, with a maximum power dissipation of 5.927W and a current rating of 442.3 mA at 24V DC. It has a continuous isolation voltage of 30V and basic insulation between power and network channels, tested at 500V AC for 60 seconds. Its operating temperature range is -40-158F, storage temperature range is -40-185F, and maximum ambient temperature is 158F with 5-95% non-condensing relative humidity. It withstands 2 g operating vibration (10-150 Hz), 15 g operating shock, and 30 g non-operating shock.
Is Your Device Showing These Signs?
The Allen Bradley 1783-US6T2H Stratix 5700 managed switch commonly experiences issues such as backplane failures, resulting in complete unit inoperability; resolve this by replacing the backplane. Configuration corruption leads to network segmentation faults; re-flash the firmware and restore the configuration from a known good backup. Power supply degradation causes intermittent connectivity; replace the power supply unit. Port failures manifest as inability to establish Ethernet connections; troubleshoot by testing cable integrity and replacing the affected port module. Excessive heat buildup due to inadequate cooling leads to component stress and premature failure; improve ventilation and ensure proper operating temperature.
Technical specifications
The Allen-Bradley 1783-US6T2H Stratix 2000 is an unmanaged Ethernet switch with 6 RJ45 and 2 fiber SFP ports. It features broadcast storm protection, status indicators, and specific wiring requirements for power and ground. It's DIN-rail mountable, operates on 24V DC/AC, has low power consumption, and is designed for a wide temperature range and rugged industrial environments.
Our Repair Process for the
1783-US6T2H
Our repair process for the Allen Bradley 1783-US6T2H Stratix 5700 managed switch begins with a comprehensive diagnostic assessment to identify the root cause of the malfunction. Backplane failures, indicated by complete unit inoperability, are resolved through a complete backplane replacement. Configuration corruption, identified by network segmentation faults, requires a complete firmware re-flash and restoration of the configuration from a verified backup. Intermittent connectivity issues stemming from power supply degradation are corrected by replacing the power supply unit. Port failures, evidenced by the inability to establish Ethernet connections, are addressed by testing cable integrity and replacing the faulty port module. Overheating issues, which cause component stress, are mitigated by improving ventilation and ensuring the switch operates within its specified temperature range.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.