ISO-certified repairs with a 2-year warranty — technician-verified quotes within 24 hours, nationwide.
Product Description
The Allen-Bradley 2097-V32PR0 Kinetix 300 Ethernet/IP Indexing Servo Drive is a single-phase indexing drive equipped with EtherNet/IP connectivity, suitable for various industrial motion control applications. 1 It operates with an input voltage range of 80-264V AC (240V AC nominal) at 48-62 Hertz, drawing a 5A input current with a 136A startup surge. The drive has a 2A control current and a control voltage range of 20-26V DC. It provides a 2A output current with a 6A peak and an output power of 400W at 240V AC. Featuring an integrated AC line filter (2090-XXLF-TC116), it requires a 40-Ohm passive shunt resistor with ratings of 3.8KW power and 9.8A peak current, and a shunt ON/OFF voltage of 390V DC and 375V DC. The 2097-V32PR0 has a short circuit rating of 100,000A (symmetrical) and offers BUS over-voltage protection at 430V DC. Its circuitry is protected by a 240V AC, 20A, fast-acting Class T and Class CC Bussman fuse, a 140M-F8E-C20 circuit breaker, and a 240V AC DC/AC coil contactor. It is also recommended for use with a 120V AC to 240V AC output transformer with input ratings of 460V AC and 750VA. The drive has a total power dissipation of 28W and is designed for operation between 0-40 °C at a relative humidity of 5-95% (non-condensing). With a maximum installation height of 1500m without de-rating, it can withstand 2.5G operational vibration (5-200Hz) and 15G shock. 2 It weighs 1.4Kg and has dimensions of 238mm x 68.0mm x 230mm.
Is Your Device Showing These Signs?
The Allen Bradley 2097-V32PR0 Servo Drive commonly experiences issues related to power supply failures, resulting in operational downtime. Resolve communication errors stemming from corrupted firmware or incorrect Ethernet/IP configurations. Address motor control problems caused by faulty IGBTs, resolver feedback inaccuracies, or improperly tuned PID loops. Correct overcurrent faults triggered by excessive load, wiring shorts, or motor insulation breakdown. Rectify position errors due to encoder malfunctions, backlash, or mechanical wear within the servo system.
Technical specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number/Catalog No.: 2097-V32PR0
Input Voltage: 240 Volts (One Phase)
Drive Voltage: 240 Volts (One Phase)
Continuous Output Current (0-peak): 2.8 Amperes
Power Dissipation: 28 Watts
Torque Value: 4.5 lbin (0.5 Nm)
Safe Torque-Off: Yes
120 Volt Doubler Mode: No
Integrated AC Line Filter: Yes
Operating Temperature: 32-104 F (0-40 C)
Dimensions: 9.37 x 9.04 x 2.68 in (238 x 230 x 68.0 mm)
Weight: 3.1 lbs (1.4 kg)
Our Repair Process for the
2097-V32PR0
Our repair process for the Allen Bradley 2097-V32PR0 Servo Drive begins with a comprehensive diagnostic evaluation to pinpoint the root cause of the reported issue, whether it be power supply failure, communication errors, motor control problems, overcurrent faults, or position errors. We then proceed with component-level repairs, replacing faulty IGBTs, resolvers, encoders, or other damaged parts with genuine Allen Bradley components. Firmware is updated or reimaged to eliminate corruption, and Ethernet/IP configurations are verified and corrected. PID loops are meticulously tuned to optimize motor performance and eliminate instability. Finally, the repaired drive undergoes rigorous testing under simulated operating conditions to ensure it meets or exceeds original performance specifications, guaranteeing a reliable and fully functional unit upon return.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY