Same-day processing! Local pickup & overnight shipping available. (Order by 5pm ET, M-F)
Product Description
The Allen-Bradley 2097-V32PR0-LM is a Kinetix 350 servo drive designed for single-phase 240 Volts AC operation, offering a power capacity of 0.40 kilowatts and a continuous output current of 2.8 Amps. It utilizes a 20 Amp KTK-R-20 Bussman fuse and features an integrated AC line filter and Safe Torque-Off. The 2097-V32PR0-LM employs Ethernet/IP (Internet Protocol) for connectivity with programmable controllers and I/O devices, and, like other Kinetix 350 series drives, includes internal solid-state protection against motor short circuits.
For motor protection, the drive also uses the 1489-M1C150 miniature circuit breaker and the 140M-D8E-C20 circuit breaker. The 2097-V32PR0-LM is a single-axis drive that accommodates 14 AWG wire with a 0.28-inch strip length and withstands a 0.5 N-m torque. The wiring cable should be copper and rated for 75 degrees Celsius ambient temperature. As with other Kinetix 350 servo drives, the 2097-V32PR0-LM is equipped with LED indicators to monitor drive operation, displaying the status of the network, module, axis, communication data, and more. The drive also includes connectors for motor feedback (D-shaped 15-pin port), a ground lug, shunt resistor (7-pin terminal block), backup power (2-pin terminal block), motor power, Safe Torque-Off (6-pin terminal block), I/O (D-shaped SCSI 50-pin high port), main connector, and an 8-pin Ethernet communication port.
Is Your Device Showing These Signs?
The Allen Bradley 2097-V32PR0-LM commonly experiences issues such as resolver feedback errors, requiring resolver replacement or cable repair. Drive faults related to overcurrent or overvoltage conditions necessitate investigation of motor windings, power supply integrity, and proper grounding. Communication failures on the EtherNet/IP network demand troubleshooting of IP address conflicts, cabling issues, and firmware incompatibility. Inconsistent motor performance or erratic behavior indicates potential problems with the drive's configuration parameters, requiring recalibration or parameter reset. Overheating problems are addressed through fan replacement, heatsink cleaning, and ensuring proper ambient temperature.
Technical specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
120 Volts Doubler Mode: No
Continuous Output Current (0-peak): 2.8 Amperes
Integrated AC (EMC) Line Filter: Yes
Input Voltage: 240 Volts (AC), 1 Phase
Power Rating: 400 W
Part Number/Catalog No.: 2097-V32PR0-LM
Safe Torque-Off: Yes
Dimensions: 9.37 x 7.29 x 3.06 in (238 x 185.1 x 12.38 mm)
Weight: 3.1 lbs (1.4 kg)
Our Repair Process for the
2097-V32PR0-LM
Our repair process for the Allen Bradley 2097-V32PR0-LM begins with a comprehensive diagnostic evaluation to pinpoint the root cause of the reported issue. Resolver feedback errors are resolved through resolver replacement or cable repair. Drive faults stemming from overcurrent or overvoltage conditions mandate a thorough investigation of motor windings, power supply integrity, and grounding effectiveness. Communication failures on the EtherNet/IP network are rectified by resolving IP address conflicts, repairing cabling issues, and ensuring firmware compatibility. Inconsistent motor performance or erratic behavior requires recalibration or parameter reset to correct drive configuration parameters. Overheating problems are addressed by replacing the fan, cleaning the heatsink, and ensuring the ambient temperature is within specified limits.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY