Product Description
The Allen-Bradley 2098-DSD-010X-DN is an Ultra 3000 Digital Servo Drive Module with DeviceNet and Indexing capabilities. It is a single-phase AC drive used for controlling many industrial servo motors.
The module weighs 2.1Kg (4.6 lbs) and has dimensions of 98.1 mm x 32.77 mm x 65.02 mm. It is designed to operate in temperatures ranging from 0-55 °C (32-131 °F) and can be stored in temperatures from -40-70 °C (-40-158 °F). The module functions within a relative humidity range of 5-95% without condensation.
The 2098-DSD-010X-DN can withstand an operating shock of 15 g (3 pulses, 11 ms) and a nonoperating shock of 30 g (3 pulses, 11 ms). It is also built to function optimally under 2.5 g vibration. The module can operate at altitudes up to 1000 m (3280 ft) without derating; however, continuous current values must be derated by 3% for each additional 300 m (984 ft) up to 3000 m (9842 ft).
The 2098-DSD-010X-DN has 8 active digital inputs and 4 optically-isolated output current sources with a relay output of 30V DC (max) and 1A (max) Normally-Open relay. It has an input rating of 9A (with a 100 A current surge) and operates with 100-240V AC (single phase) at 47-63Hz. The module has an intermittent output rating of 15A.
This module can deliver a maximum output power of 1 kW at 230V AC, with a maximum energy absorption capability of 51 Joules, and it features a BUS capacitance of 1880μF. The module provides 400V DC BUS overvoltage protection.
Is Your Device Showing These Signs?
The Allen Bradley 2098-DSD-010X-DN servo drive commonly experiences issues related to corrupted firmware requiring a re-flash, failed power components such as capacitors or IGBTs causing operational faults, communication errors on the DeviceNet network due to damaged connectors or incorrect baud rates, and resolver feedback problems stemming from wiring issues or a faulty resolver interface. Overcurrent faults are frequently traced to motor shorts or incorrect drive parameters. Repair includes component-level troubleshooting, firmware updates, parameter verification, and thorough testing to ensure proper functionality and prevent future failures.
Technical specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number/Catalog No.: 2098-DSD-010X-DN
Series: Ultra 3000 Drives
Output Current (Intermittent): 15 Amps (0-peak)
Output Current (Continuous): 5 Amps (0-peak)
Auxiliary Power Supply: No
Nominal Input Current (AC): 9 Amps Root Means Square
Input Frequency (AC): 47-63 Hz
Input Voltage (AC): 100-240 Voltage Root Means Square (Single Phase)
Bus Capacitance: 1880 muF
Bus Overvoltage: 400 Volts dc
Shunt On: N/A
Dimensions: N/A
Weight: 7.8 x 5.68 x 4.79 in (198.12 x 144.27 x 121.54 mm)
Features: DeviceNet and Indexing
Internal Shunt Resistance: N/A
Our Repair Process for the
2098-DSD-010X-DN
Our repair process for the Allen Bradley 2098-DSD-010X-DN servo drive begins with a comprehensive component-level diagnostic procedure to identify the root cause of the failure, addressing common issues such as corrupted firmware, failed power components (capacitors, IGBTs), DeviceNet communication errors, resolver feedback problems, and overcurrent faults. Firmware is updated or re-flashed as needed, and all drive parameters are verified against the application requirements. Damaged connectors are replaced, wiring issues are corrected, and faulty resolver interfaces are repaired or replaced. Repaired drives undergo rigorous testing under load to confirm proper functionality and ensure the implemented solutions prevent future failures.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY