Product Description
The Allen-Bradley 2098-DSD-HV150X has an input voltage (AC) rating of 230-480V AC root mean square (three-phase). This module operates with an input frequency (AC) range of 47-63 Hertz and has a nominal input current (AC) of 20A root mean square. It also provides a 34A (0 to peak) continuous output current and a 68A (0 to peak) intermittent output current. 1 The module's dimensions are 9.54 x 14.2 x 5.97 inches (242.2 x 360.7 x 151.6 mm), and it weighs approximately 10.44 kg (22.96 lbs).
The 2098-DSD-HV150X complies with Electromagnetic Compatibility (EMC) standards, specifically EN 50081-2 (EMC - Generic Emission Standard, Part 2 - Industrial Environment) and EN 50082-2 (EMC – Generic Immunity Standard, Part 2 - Industrial Environment).
A safety precaution is given: connecting or disconnecting cables while power is applied to this module or any device on the network can produce an electrical arc.
Key electrical characteristics of the 2098-DSD-HV150X include:
Internal shunt resistance: 25 Ω
Shunt-On voltage: 800V DC
Shunt-Off voltage: 750V DC
This module includes a set of parameters used to configure and monitor drives. It also features faulted-node recovery, which allows the node address of a device to be changed even when it is faulted on the network.
A caution is provided: users should not attempt to repair the faulty drive module circuit. Instead, the underlying cause of the error must be identified and resolved before attempting to operate the system.
Is Your Device Showing These Signs?
The Allen Bradley 2098-DSD-HV150X servo drive commonly experiences issues such as resolver feedback failures, DC bus overvoltage faults due to regenerative energy, and communication errors on the EtherNet/IP network. Technicians frequently address problems with power stage components including IGBT failures and gate driver malfunctions. Corrective actions involve replacing damaged components, recalibrating the resolver, and updating firmware to resolve communication glitches. Overheating due to inadequate cooling or blocked heatsinks also necessitates inspection and maintenance of the thermal management system.
Technical specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number/Catalog No.: 2098-DSD-HV150X
Series: Ultra 3000 Drives
Output Current (Intermittent): 68 Amps (0-peak)
Output Current (Continuous): 34 Amps (0-peak)
Auxiliary Power Supply: Yes
Nominal Input Current (AC): 20 Amps Root Means Square
Input Frequency (AC): 47-63 Hz
Input Voltage (AC): 230-480 Voltage Root Means Square (Three Phase)
Bus Overvoltage: 810 Volts dc
Shunt On: 800 Volts dc
Dimensions: 750 Volts dc
Features: Indexing
Internal Shunt Resistance: 25 Ohms
Our Repair Process for the
2098-DSD-HV150X
Our repair process for the Allen Bradley 2098-DSD-HV150X servo drive begins with a comprehensive diagnostic evaluation to pinpoint the root cause of the reported issue, whether it be resolver feedback failures, DC bus overvoltage faults, EtherNet/IP communication errors, or power stage component malfunctions such as IGBT failures. Technicians replace all damaged components, recalibrate the resolver to ensure accurate positioning, and update the firmware to address any communication glitches. The thermal management system is thoroughly inspected, and any inadequate cooling or blocked heatsinks are rectified to prevent overheating.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY