ISO-certified repairs with a 2-year warranty — technician-verified quotes within 24 hours, nationwide.
Product Description
The Allen-Bradley 2098-DSD-HV220 is an Ultra 3000 Servo Drive, designed with support for modern integration and configuration methods.
This drive offers USB connection support for both USB 1.0 and 2.0 versions, with communication rates of 1200, 2400, 4800, 9600, or 19,200 bps using USB 1.0, and 1200, 2400, 4800, 9600, 19,200, or 38,400 bps using the USB 2.0 port.
The 2098-DSD-HV220 has the following output current and power ratings:
Continuous Output Current: 47A
Intermittent Output Current: 94A
Continuous Power Output: 11 kW at 230V ac input and 22 kW at 460V ac input
This drive operates with an input voltage range of 230-480V rms, 3-phase, at an input frequency of 47-63 Hz.
Important installation and safety considerations include:
Using standard high-density D-shell connectors that comply with applicable standards and codes.
Employing proper circuit breakers due to potential high current inrush.
The connector pinout is designed with separate pins for RS-232 and RS-422/RS-485 signals, allowing for communication standard changes by using different cables.
Ensuring the appropriate amount of shunt capacitance is in place to protect the device from damaging sudden surges.
The 2098-DSD-HV220 is a servo drive designed to meet global voltage requirements and is suitable for various machine control applications. It is compatible with the LPJ-35SP fuse, which is rated for 460V.
This drive is approved for use in hazardous locations and has the following environmental specifications:
Operating temperature range: 0-55 degrees Celsius
Storage temperature range: -40-70 degrees Celsius
Maximum operating and storage altitude: 1500m (with derating of 3% for every additional 300m above this height)
Installation guidelines include:
Mounting the shunt module inside the enclosure, separating shunt power cables from sensitive, low-voltage cables.
When installing the 2098-DSD-HV220 inside an enclosure, running the input power wiring in a conduit outside the enclosure.
The Allen-Bradley 2098-DSD-HV220 is a robust drive with the following electrical characteristics:
Input Voltage (AC): 230-480 Voltage Root Mean Square (Three Phase)
Input Frequency (AC): 47-63 Hertz
Nominal Input Current (AC): 28 Amperes Root Mean Square
Continuous Output Current: 47 Amperes (0-peak)
Intermittent Output Current: 94 Amperes (0-peak)
Dimensions: 9.54 x 15.43 x 8 inches
Is Your Device Showing These Signs?
The Allen Bradley 2098-DSD-HV220 servo drive commonly experiences issues related to power stage failures, resulting in overcurrent faults and preventing motor operation. Resolving communication errors on the EtherNet/IP network, including addressing IP conflicts and firmware incompatibilities, restores connectivity. Encoder feedback problems, stemming from faulty wiring or damaged encoders, cause erratic motor behavior and require immediate attention. Component degradation on the drive's control board leads to unpredictable performance and necessitates repair or replacement. Improper parameter configuration within the drive's software can hinder optimal performance and must be rectified.
Technical specifications
Manufacturer: Rockwell Automation
Dimensions: 750 Volts dc
Shunt On: 800 Volts dc
Bus Overvoltage: 810 Volts dc
Bus Capacitance: 1880 µF
Input Voltage (AC): 230-480 Voltage rms, 3-Phase
Input Frequency (AC): 47-63 Hz
Auxiliary Power Supply: Yes
Output Current (Continuous): 47 Amps (0-peak)
Output Current (Intermittent): 94 Amps (0-peak)
Part Number/Catalog No.: 2098-DSD-HV220
Features: Indexing
Internal Shunt Resistance: 20 Ohms
Brand: Allen-Bradley
Nominal, 230V ac input,: 0.55 Amps rms
Nominal, 360V ac input,: 0.35A
Nominal, 480V ac input: 0.25A
Series: Ultra 3000 Drives
Nominal Input Current (AC): 28 Amps Root Means Square
Weight: 9.54 x 15.43 x 8.0 in (242.2 x 391.8 x 203.2 mm)
Our Repair Process for the
2098-DSD-HV220
Our repair process for the Allen Bradley 2098-DSD-HV220 servo drive begins with a comprehensive diagnostic evaluation to pinpoint the root cause of the malfunction, focusing on common issues such as power stage failures indicated by overcurrent faults, communication errors on the EtherNet/IP network, encoder feedback problems, component degradation on the control board, and improper parameter configuration. Power stage failures are addressed through component-level repair or module replacement, ensuring the drive can deliver the necessary current for motor operation. Communication errors are resolved by addressing IP conflicts, updating firmware to compatible versions, and verifying network connectivity. Encoder feedback problems are corrected by repairing or replacing faulty wiring and damaged encoders, ensuring accurate motor control. Component degradation on the control board necessitates repair or replacement of affected components to restore stable performance. Improper parameter configurations are rectified through software adjustments, optimizing the drive's performance to meet specific application requirements.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY