ISO-certified repairs with a 2-year warranty — technician-verified quotes within 24 hours, nationwide.
Product Description
The Allen-Bradley 2098-IPD-005 is a drive from the Ultra5000 Intelligent Positioning Drives series. It operates with a single-phase 100-240V AC input voltage and delivers a 2.5A continuous output current, with a 7.5A peak output current. The drive's AC input frequency is 47 - 63 Hz, and its nominal input current is 5 A rms. It offers a 51 Joules energy absorption capability and provides a 0.5 kW continuous power output at 230V AC input.
The 2098-IPD-005 Intelligent Positioning Drive features 28-pin CN1A and 14-pin CN1B signal connections on its front panel. These connections utilize double-row, pluggable, spring-clamp connectors with 3.5mm spacing, which are included with the drive. Additional standard high-density D-shell signal connectors include the 15-pin CN2 for motor feedback, the 9-pin CN3A as a main serial port, and the 9-pin CN3B as an auxiliary serial port.
The 2098-IPD-005 Ultra5000 Drive comes with one installation manual (publication 2098-IN001), one screwdriver, two I/O connector plugs (28-pin CN1A and 14-pin CN1B), and one clear plastic terminal strip cover. It's important to retain the plastic cover, as it can be installed on the power terminal strip to provide a physical barrier and protection.
Classified as IEC controlgear, this drive must be mounted within an enclosure that meets IEC60529 electrical requirements. It is recommended to maintain minimum clearances of 0.5 inch on the sides and 2 inches on the top and bottom to ensure easy module access, proper cable bend radius, and adequate airflow.
Is Your Device Showing These Signs?
The Allen Bradley 2098-IPD-005 commonly experiences issues related to resolver feedback malfunction, resulting in erratic motor control. Drive faults stem from power stage failures, specifically IGBT or capacitor degradation. Communication errors on the EtherNet/IP network, often due to corrupted firmware or faulty network interfaces, require immediate attention. Overcurrent faults and overheating are addressed through thermal management improvements and load optimization. Axis drive performance degradation necessitates thorough inspection of the motor windings and associated cabling for insulation breakdown or shorts.
Technical specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number/Catalog No.: 2098-IPD-005
Series: Ultra 5000 Drives
Output Current (Intermittent): N/A
Output Current (Continuous): 2.5 Amps (0-peak)
Auxiliary Power Supply: No
Nominal Input Current (AC): 5 Amps Root Means Square
Input Frequency (AC): 47-63 Hz
Input Voltage (AC): 100-240 Voltage Root Means Square (Single Phase)
Internal Shunt Resistance: N/A
Bus Overvoltage: N/A
Shunt On: N/A
Dimensions: N/A
Weight: 4.59 x 5.69 x 8.08 in (116.59 x 144.53 x 205.23 mm)
Features: Standard
Our Repair Process for the
2098-IPD-005
Our repair process for the Allen Bradley 2098-IPD-005 begins with a comprehensive diagnostic evaluation to pinpoint the root cause of the malfunction, focusing on resolver feedback integrity, power stage components, and network communication. Suspected resolver feedback issues are verified through signal analysis and encoder testing, followed by replacement or recalibration as required. Power stage failures, including IGBTs and capacitors, are rectified through component replacement with rigorously tested parts. Communication errors are resolved by reflashing firmware and/or replacing faulty network interfaces. Overcurrent and overheating problems are addressed by optimizing thermal management and load parameters. Axis drive performance degradation prompts a thorough inspection of motor windings and cabling, with repairs or replacements performed to eliminate insulation breakdown or shorts, ensuring optimal functionality.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY