ISO-certified repairs with a 2-year warranty — technician-verified quotes within 24 hours, nationwide.
Product Description
The Allen-Bradley 2098-IPD-HV220-DN is a high-performance Ultra5000 Intelligent Positioning Drive, designed and manufactured by Allen-Bradley. It is a fully programmable servo drive, known for its robust Integrated Power Module (IPM) based power section and advanced Digital Signal Processing (DSP) based architecture. The drive is programmed using ANSI C motion commands, and its optimized design allows for high-speed position capture with a latency of less than 1.0μs.
Here are the key specifications of the 2098-IPD-HV220-DN:
Continuous Power Output: 22 kW at 480 Volts AC
Weight: 31.77 pounds
Dimensions: 9.00 x 15.43 x 14.28 inches
I/O: One normally open relay output, seven (7) optically isolated outputs, and sixteen (16) optically isolated inputs
Input Voltage: 230 to 480 Volts RMS of 3-phase AC
Input Frequency: 47 to 63 Hertz
Nominal Input Current: 28 A
Output Current:
33.2 A continuous (RMS)
47 A continuous (0-peak)
66.5 A peak (RMS)
94 A peak (0-peak)
Bus Capacitance: 1880µF
Internal Shunt Resistance: 20Ω
Bus Overvoltage Protection: 810 Volts DC
Memory: 512 Kb flash memory and 23 Kb non-volatile SRAM
Power Dissipation: 600 Watts (with a dissipative shunt)
Communication and Network Features:
DeviceNet Interface: Enables communication on a DeviceNet network.
Messaging: Supports Explicit and polled I/O messaging capabilities.
Unconnected Message Manager (UCMM): Allows for establishing up to five Group 3 Explicit messaging connections.
Data Rates: 125, 250, and 500 kbps
Node Address Range: 0 to 63
Faulted-Node Recovery: Provides the ability to change the faulted node addresses of a device.
Is Your Device Showing These Signs?
The Allen Bradley 2098-IPD-HV220-DN commonly experiences issues related to resolver feedback malfunction, resulting in erratic motor control or complete drive failure. Communication errors on the DeviceNet network are frequent, stemming from cabling problems, node address conflicts, or faulty network termination. Power supply failures within the integrated drive are observed, causing operational downtime. Overcurrent faults and I2t trips occur due to incorrect motor parameter settings or mechanical overload. Firmware corruption necessitates reprogramming to restore proper functionality.
Technical specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number/Catalog No.: 2098-IPD-HV220-DN
Series: Ultra 5000 Drives
Output Current (Intermittent): 94 Amps (0-peak)
Output Current (Continuous): 47 Amps (0-peak)
Auxiliary Power Supply: Yes
Nominal Input Current (AC): 28 Amps Root Means Square
Input Frequency (AC): 47-63 Hz
Input Voltage (AC): 230-480 Voltage Root Means Square (Three Phase)
Our Repair Process for the
2098-IPD-HV220-DN
Our repair process for the Allen Bradley 2098-IPD-HV220-DN begins with a comprehensive diagnostic evaluation to pinpoint the root cause of the malfunction, focusing on resolver feedback integrity, DeviceNet communication status, power supply functionality, and fault history. Resolver signals are scrutinized for accuracy and stability; DeviceNet cabling, node addresses, and termination are verified to ensure proper network operation. The power supply is tested under load to confirm it meets specified voltage and current requirements. Motor parameters are assessed and adjusted to prevent overcurrent faults and I2t trips. If firmware corruption is detected, the drive is reprogrammed with the correct firmware version. Following component-level repairs or replacements, the drive undergoes rigorous testing to validate its performance under various operating conditions, ensuring it meets factory specifications before it is returned.
Your Guarantee: Warranty & Lifetime Support
Your satisfaction is our top priority, and we confidently stand behind the quality of our repairs. That's why every repair service is covered by our comprehensive 24-month warranty. Furthermore, we offer lifetime phone support – if you have questions or need assistance related to our repair down the road, we're here to help. Our service commitment is straightforward: we guarantee our work, and if you're not satisfied, we will make it right. Learn More about our Repair process.
Comprehensive Repairs You Can Depend On
We take immense pride in the quality and reliability of our work. Our process goes beyond simply fixing the immediate problem. We perform a comprehensive inspection of your main board (or other equipment) and proactively replace components known to be failure-prone or showing signs of potential future failure. Before any item is returned, it undergoes rigorous functional testing to ensure it meets performance specifications and operates flawlessly. Visit our main Repair Services page to learn more.
Save Significantly
Our primary goal is to save you hundreds, or even thousands, of dollars compared to the cost of new equipment replacement. By repairing existing components, we provide an economical solution that is also eco-friendly. At Roc Industrial, our commitment to integrity and community drives our consistent growth and ensures you receive a reliable, cost-effective solution.
Please Note: Roc Industrial operates as an independent service provider and is not an authorized distributor for the manufacturers or brands mentioned. Consequently, the original manufacturer's warranty is not applicable to items repaired or sold by us. Roc Industrial provides its own 2-year warranty on all repair services performed.
Buying Options
To receive a quote within 2 hours, please provide us with the details of your requirements. Our team will promptly review your request and send you a custom offer.
Ships from Rochester, NY